Scribe-Master KWJ900PRO Adjustable Length Sight Line Worktop Jig 150-900mm

The Scribe-Master KWJ900 PRO is a 150-900mm Adjustable Worktop Jig with Square Window Sight Line Technology. EASY 1..2..3 Patent Pending. Simply mark your cut line using your square, line up the line with the window in the jig, make your cut. No more spacing from the back end of the jig.

Features:

FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops using Sight Line Technology Window
EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line
5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends
SET UP as 300mm, 750mm or 900mm Jig
BREAKDOWN to suit job size, easy storage and portability, just 35cm x 35cm x 6cm
2 x SEPARATE 3/4" BSP/Door Hinge & Dog Hole jigs
FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up
SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life
FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up
MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate
NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths
FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut
OFFSET CAMS Unique backset wedges for consistent easy setting
EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles
CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps
ENGRAVED MARKINGS for clear reference

Comes With:

6 Fasteners
4 x ABS Plastic Pins
4 Backset Pins
Spanner

Specification:

Length - 985 mm
Width - 335 mm
Thickness - 12 mm
End Cut - 45 degrees
Corner Radius - 40 mm
Corner Radius - 100 mm
Corner Radius - 400 mm
Corner Mitre Joint - 45 degrees
Female cut material width loss (inset) variable
Bolt recesses - 3
Bolt recess centres - 175 + 175 mm
Bolt recess width -14 mm
Guide bush - 30 mm (not included)
Plunge router (not included) - 1/2-inch (min. 1300 watts)
Cutter - 12.7 mm x 50 mm cut (not included)
Clamps - Two (not included)
Weight - 4.73 kg

Worktop Jig Template - Scribe-Master